Wrecked Honda S2000 Is Finally Back!!!

This is where it gets interesting!!! We are bringing back one of our fallen builds that we never had time to get back to. Sometime you have to take some time to think things through then go at it with a different approach. We know that there will be problems that try to get in the way but we won't let that ever stop us. Thanks For Watching And Enjoy!!!
-GOONZQUAD NEW MERCH!!!: goonzquad.com
-Instagram: instagram.com/goonzquad/
-Email: goonzquadteam@gmail.com
-P.O. Box 37
Rossville,GA 30741
Music Credits:Song:
Chris Lehman - Flash (Vlog No Copyright Music)
Music promoted by Vlog No Copyright Music.
Video Link: th-vision.net/detail/%E0%B8%A7%E0%B8%B5%E0%B8%94%E0%B8%B5%E0%B9%82%E0%B8%AD-CZbq2c4p0cs.html
Song: Dipcrusher - Islands (Vlog No Copyright Music)
Music provided by Vlog No Copyright Music.
Video Link: th-vision.net/detail/%E0%B8%A7%E0%B8%B5%E0%B8%94%E0%B8%B5%E0%B9%82%E0%B8%AD-CpFneq3zIt4.html
Song: Daloka - My Holidays (Vlog No Copyright Music)
Music promoted by Vlog No Copyright Music.
Video Link: th-vision.net/detail/%E0%B8%A7%E0%B8%B5%E0%B8%94%E0%B8%B5%E0%B9%82%E0%B8%AD-ZLiVZZzbZoQ.html
Song: Arensky - Shallows (Vlog No Copyright Music)
Music promoted by Vlog No Copyright Music.
Video Link: th-vision.net/detail/%E0%B8%A7%E0%B8%B5%E0%B8%94%E0%B8%B5%E0%B9%82%E0%B8%AD-uiHcZmFFw2I.html
Song: LiQWYD - You (Vlog No Copyright Music)
Music provided by Vlog No Copyright Music.
Video Link: th-vision.net/detail/%E0%B8%A7%E0%B8%B5%E0%B8%94%E0%B8%B5%E0%B9%82%E0%B8%AD-aQt1soUa4J8.html
Lioness (Instrumental) by DayFox soundcloud.com/dayfox
Free Download / Stream: bit.ly/lioness-instrumental
Music promoted by Audio Library th-vision.net/detail/%E0%B8%A7%E0%B8%B5%E0%B8%94%E0%B8%B5%E0%B9%82%E0%B8%AD-ZATMh49j49M.html
Song: Markvard - Dawn (Vlog No Copyright Music)
Music provided by Vlog No Copyright Music.
Video Link: th-vision.net/detail/%E0%B8%A7%E0%B8%B5%E0%B8%94%E0%B8%B5%E0%B9%82%E0%B8%AD-HEhF7zL7LDo.html
Song: MBB - Feel Good (Vlog No Copyright Music)
Music provided by Vlog No Copyright Music.
Video Link: th-vision.net/detail/%E0%B8%A7%E0%B8%B5%E0%B8%94%E0%B8%B5%E0%B9%82%E0%B8%AD-wIDKJeLXO5Q.html
Song: Nekzlo - Palm Shadows (Vlog No Copyright Music)
Music promoted by Vlog No Copyright Music.
Video Link: th-vision.net/detail/%E0%B8%A7%E0%B8%B5%E0%B8%94%E0%B8%B5%E0%B9%82%E0%B8%AD-NjaN0uA0LjQ.html
Song: NOWË - Undefeated (Vlog No Copyright Music)
Music provided by Vlog No Copyright Music.
Video Link: th-vision.net/detail/%E0%B8%A7%E0%B8%B5%E0%B8%94%E0%B8%B5%E0%B9%82%E0%B8%AD-4uPVLYXbF4M.html



  • 16:50 you can see the engine jack bleeding off lol

    Bra dyBra dy5 วันที่ผ่านมา
  • Great videos watch everyday thanks for them

    DJ StrokesDJ Strokes8 วันที่ผ่านมา
  • You should have had the head resurfaced before putting the new head gasket in, this would have avoided you the issue had with the coolant still leaking through the cylinders. Love your videos by the way :)

    kangoooo2000kangoooo20008 วันที่ผ่านมา
  • Take a regular car and insert a sports car's engine into it like a ferrari or a lambo engine

    dogge15599dogge155999 วันที่ผ่านมา
  • You have a wife you two

    Matt FletcherMatt Fletcher10 วันที่ผ่านมา
  • I want to be like you 🇦🇿🇱🇷 🇬🇧

    Matt FletcherMatt Fletcher10 วันที่ผ่านมา
  • Really like the honesty in this channel. It’s not my engine but was really rooting for your guys.

    TechytechTechytech10 วันที่ผ่านมา
  • Yall should work on a Mercedes?

    zacquey dunzacquey dun10 วันที่ผ่านมา
  • Catching up on this series and I'm glad y'all put the numbers-matching engine back in. Should of been this way from the start!

    Aaron CastellanosAaron Castellanos11 วันที่ผ่านมา

    Matt FletcherMatt Fletcher11 วันที่ผ่านมา
  • You guys sure work hard but unfortunately not smart. Some research and advice from a knowledgeable person would’ve saved you so much time.

    Jose AhumadaJose Ahumada11 วันที่ผ่านมา
  • dudes you have to mill the block to it´s aluminium and is probably warped, might as well take the whole engine apart. the crank and rod bearings dosn´t like coolant mixture and overheating either, ps you guys rock still big up from sweden

    Kristofer sjöströmKristofer sjöström12 วันที่ผ่านมา
  • So sorry guys, that auto correct is really annoying. I'm a born again christian and feel so embarrassed about that auto correct. Anyway guys just a rule of thumb when removing an aluminum or cast iron head, the procedure is to have the head milled so the head surface will be perfectly straight. This will ensure proper head gasket longevity.

    Derrick AvilaDerrick Avila12 วันที่ผ่านมา
  • Sorry, stick in the mud. Stupid auto correct.

    Derrick AvilaDerrick Avila12 วันที่ผ่านมา
  • Guys I hate to be a dick in the mud but you had to shave that head before your reinstall or you'll have premature gasket failure.

    Derrick AvilaDerrick Avila12 วันที่ผ่านมา
  • Best way to learn is to try and sometimes make mistakes. It's also the most expensive way, but you will sure remember them for the next time!

    DamienDamien22 วันที่ผ่านมา
  • Always a good idea to check flatness of the head surface because its machined surface. So when you have a blown head gasket, you should probably get the head machined anyway to make sure and to freshen it up.

    Toby BishopToby Bishop23 วันที่ผ่านมา
  • No matter what happens, your enthusiasm just comes smiling through...brilliant!.

    Steve BaileySteve Bailey23 วันที่ผ่านมา
  • Try to switch heads

    Joe BaconJoe Bacon24 วันที่ผ่านมา
  • You forgot to "Resurface" the Head, probably that's why you get the water/oil mix again...

    Gu LimaGu Lima24 วันที่ผ่านมา
  • Please bring this car back

    DC5 _WillDC5 _Will25 วันที่ผ่านมา
  • The thing a lot of viewers miss is, They try to figure it out as they go along, experience has always been the best teacher! I give them total credit for working as a team, they often show and say they made a mistake, and try again! ... EVERYONE OF US has made mistakes and can look back at things we have done and realize after the fact we should have done something differently. I totally enjoy watching the two of them! Keep up the great videos, and don't ever let anyone tell you that you cant do something if you determined enough!

    Powertizing AdvertizingPowertizing Advertizing25 วันที่ผ่านมา
  • YOu guys have a good engine with a simple sensor difference most likely the cam sensor, either get this sensor swapped out or use the harness from the parts car, I have swapped honda engines before and either had to change a sensor or a couple wires had to be swapped in the jacks for the sensor...get a copy of the wiring harnesses online and see what the differences are...dont buy a new engine you already have one at hand.

    Rockso DipsoRockso Dipso27 วันที่ผ่านมา
  • What is APR? Some Chinese clone company??

    csorrowscsorrows27 วันที่ผ่านมา
  • if anybody you know is military or even ex-military, you can sign up for an account with militaryonesource.com and they have an extensive online chilton car manual library. best part, it's completely free! just a resource available to anyone with military, or i think even public servants might be able to go on there, worth checking into.

    headq100headq10029 วันที่ผ่านมา
  • Get a new head

    andres lizarragaandres lizarraga29 วันที่ผ่านมา
  • Why didnt you re-surface the head?

  • just put the other motor in and just get a flash pro and tune it

  • Its ARP, not APR lol

  • leave it to a family member to f-up the churches money smh

    Merica MadeMerica Madeหลายเดือนก่อน
  • Are you trying to get sponsorship from ARP? I hope it works.

    Joe TuckerJoe Tuckerหลายเดือนก่อน
  • Just take the head off of the 05 engine, send it to be machined flat and swap it out. That new head gasket will need changing but everything else new should be ok.

    Andrew ArmstrongAndrew Armstrongหลายเดือนก่อน
  • If you are doing a head gasket job and you are not replacing the pistons you should never clean them or the car will smoke after you put it together and run it . Learned it the hard way

  • You guys have warped head ot block. You should have had the block and head decked. Dont throw away the engine. It will only cost a couple hunded dollars instead of thousands for a new motor. Never use a wire wheel on the block to clean the gasket. You should have used a razor blade. Try again guys. It a good learning experience. Love the videos.

    Afmet AhmediAfmet Ahmediหลายเดือนก่อน
  • Check the piston return spring if there is

    Paul FernandesPaul Fernandesหลายเดือนก่อน
  • Probably going for the 8th one 🤣🤣

    Ain't StockAin't Stockหลายเดือนก่อน
  • Who ever hit the Ferrari is brain dead

    Justin BernerJustin Bernerหลายเดือนก่อน
  • Put a civic engine in a then it well rep

    Najjon JamesNajjon Jamesหลายเดือนก่อน
  • You have to machine the head they warp when the gasket goes I did the same thing!

  • feels like watching mad max fury road: all those jargons - gas head gas kit war boy lol

  • Are you guys twins brothers?

  • I like to see you swap something else into this car. An LS swap is usually the first thing that comes to mind when one hears “swap” but something different and off the wall would be even cooler. Maybe a 2jz, Coyote, or even a Hellcat would be neat to see. With that being said I know absolutely noting about S2000’s or the complexities of a swap like that so this may not even be possible or a completely stupid idea. It would make for some interesting content, test your skills, and take your car building to a different level.

    Todd RTodd Rหลายเดือนก่อน
  • keep it work boys

    Renan DetuageRenan Detuageหลายเดือนก่อน
  • You guys need to learn about the engines now! It’s time!!! Get some help from local machine shops and learn about engines this time! What I think is that you should swap the wiring harnesses and ecu from the wrecked S2k that’s the most sensible option here.

    Lord SkylineLord Skylineหลายเดือนก่อน
  • For some reason this video is recommending my video th-vision.net/detail/%E0%B8%A7%E0%B8%B5%E0%B8%94%E0%B8%B5%E0%B9%82%E0%B8%AD-mpwGcl54zug.html

    ReviewandPlay 23ReviewandPlay 23หลายเดือนก่อน
  • Whenever you do a head gasket you should take the head to a machine shop and have it pressure checked and resurfaced . Also whenever you have antifreeze mixed in with the oil there's a good chance the main and rod bearings will need replacing . Also if you pull the head off a motor and see cylinders that are clean and carbon free that usually means water has been getting into the cylindet or cylinders.

    Robert ProutRobert Proutหลายเดือนก่อน
  • Cylinder heads and blocks may need to be resurfaced to restore flatness or to improve the surface finish. To seal properly, a head gasket requires a surface finish that is within a recommended range. If the surface is too rough, or in some cases too smooth, the gasket may not seal properly and leak or fail. Try to resurfacing your cylinder head and block.

  • if u have the 07 engine u just have to change the 05 computer to the 07 computer and u can use the 07 engine and key if i was there i would change the computer and ignition switch from the 07 to the 05 or change the crank sensor out

    • i have a 1998 Honda accord with the 2.3l i have redone the head gasket and reused the head bolts and i have not problem with my car just a few things to replace like the egr valve and knock sensor and all the brakes and wheel bearings i bought my car for 300 and it was not running and i got it running that night and drove it home not every car can use the same computer so u have to change the computer goonzquad

  • My respects are excellent mechanics but in addition to being youtubers and we know that they earn a lot of money thanks to us that we see your videos you should help the people who live in the streets that do not have money to eat and now that Christmas comes from then it would be a good idea for you respectively because that youtubers do that help people, hopefully a video about this, good luck👍

    Jorge ManriquezJorge Manriquezหลายเดือนก่อน
  • More s2000 videos!

    Chrisotpher EvangelistaChrisotpher Evangelistaหลายเดือนก่อน
  • 9:14 Max has gotten huge

    Savo JaxSavo Jaxหลายเดือนก่อน
  • How about an LS V8 conversion!!

    Andrew Airport ConnectAndrew Airport Connectหลายเดือนก่อน
  • Props to you guys for taking a risk on TH-vision and showing everything you’re doing. Fyi from now on if you ever pull a head off a motor. Even a perfectly fine engine. Still send it to a machine shop. Even if it’s fine after being inspected it’s better wasting a few bucks doing that than having to replace the head twice.

  • Puré in some blue devil lol

    Nazario a minayaNazario a minayaหลายเดือนก่อน
  • Love your courage to try stuff, and ability to stay positive through whatever happens.

    Justin BirdJustin Birdหลายเดือนก่อน
  • Nice work!! Happy you guys picked up this project! Another skill to your list of accomplishments!

    Brandon RaederBrandon Raederหลายเดือนก่อน
  • You may have a warped head. If it is warped, nothing you do will fix it for that engine. You have to get it machined down.

    Brandon GBrandon Gหลายเดือนก่อน
  • please put itb’s on it they sound orgasmic

  • Just get another motor for that year model

    yung savageyung savageหลายเดือนก่อน
  • Maybe just figure out why exactly the '05 isn't running right? I mean, people stick engines from completely different makes into their rides. Same car, a year difference and it's impossible? My guess it's just one or another of the ECU's that's not agreeing with some of the other ECU's. Maybe just swap all the ECU's from the 05 with the engine and get better luck that way? Should be easier and cheaper than rebuilding the engine again?

    SideKick StudiosSideKick Studiosหลายเดือนก่อน
  • With the money your dropping on it u might as well. Go full build on the block

    Devon Casey-HokeDevon Casey-Hokeหลายเดือนก่อน
  • I appreciate the full content and stories in each video

    Tony NakhlaTony Nakhlaหลายเดือนก่อน
  • Ahhhhh when that Vtec kicks in

  • 2jz swap👍☺☺☺☺

    Billy CalitzBilly Calitzหลายเดือนก่อน
  • Before you go buying a new head, take it to the machine shop and have them rectify the head. They will tell you if you need a new one. Also, instead of wasting so much oil, just use a motor flush on engines that have had sludge like that. Read the instructions on how to use it. Autozone has the product. Then drain and use new oil and filter.

    Javier RodriguezJavier Rodriguezหลายเดือนก่อน
  • Make sure the block isn't warped as well, just use a straight edge to ensure this all to spec

    Andrew LangfordAndrew Langfordหลายเดือนก่อน
  • A good video on how to remove gasket material from aluminum engine parts. th-vision.net/detail/%E0%B8%A7%E0%B8%B5%E0%B8%94%E0%B8%B5%E0%B9%82%E0%B8%AD-FbDCHEzRuZo.html

    Matt CMatt Cหลายเดือนก่อน
  • This is a perfect time to do a K24 swap ! There are plenty of swap kits out there to mate the K24 to the S2k trans. Or contact Sikky and get all the parts for an LS swap !!!!!

  • Be sure to sent it to the shop first to be tested

  • Use the head from the other motor

Wrecked Honda S2000 Is Finally Back!!!