You deserve 1 mil subs; hilarious but still teaching
e Bierowski2 วันที่ผ่านมา
This was actually educational, thank you.
writerconsidered4 วันที่ผ่านมา
No problem!
Aaron's Garage4 วันที่ผ่านมา
Did the 1999 Century suffer from the Y2K bug?
Eric the Hiking4 วันที่ผ่านมา
It sure did!
Aaron's Garage4 วันที่ผ่านมา
This is the same thing i did in my chevy astro. Same problem and i replaced it with the update resistor and all the speeds work again. The old design i pulled from my vehicles circuit board was toasted black just like this one in the video!
Phenomental1ty14 วันที่ผ่านมา
You just helped me diagnose this issue for my 06 sebring. I've been wondering what it could be for a couple months lol
EliteCasual20 วันที่ผ่านมา
We got all spee-
Iowa Sucks21 วันที่ผ่านมา
Seen this happen with several 2000-ish GM cars. Wonder if there was a weak design on this part back then.
radon36023 วันที่ผ่านมา
*Microsoft fanfare*
BuriedFlame29 วันที่ผ่านมา
I've replaced resistors in so many Jeeps it's not even funny.
SoulSnatcher29 วันที่ผ่านมา
Good one mate. It's an old bunky so I just hit it when it misbehaves 👍😄
Nobody29 วันที่ผ่านมา
That’ll be $1400
Nathan Ross29 วันที่ผ่านมา
wow how incredibly inefficient doing resistive speed control. how hard is PWM really?
Sopan Kotbagiหลายเดือนก่อน
Why would anyone spend money on that shitbox of a car? Brakes ok, oil change sure, headlight whatever. But fixing the least useful blower speeds? People waste their own time and others.
Donz Milkyหลายเดือนก่อน
That's a thermal fuse not a resistor... Resistors on the PCB
Rory Pหลายเดือนก่อน
I don't know why that manufacturer wasn't smart enough to use pwm on blower motors. This is one of those parts designed to fail.
Jason Drennenหลายเดือนก่อน
I like you dude not just because you do a funny "customer states some ignorant statement thats totally not the problem but they are sure they know better" but also because you explain in the simplest form what is wrong and where it is, and what the solution to that would be. *NICE*
Juppie902หลายเดือนก่อน
What is with you clowns and the “customer states” videos wicked original
Daddy deezหลายเดือนก่อน
It's not rocket science, don't forget that. I do probably a better job than you for half the cash i bet
Joel Manglassหลายเดือนก่อน
seen plenty of gmc work trucks with this issue but never cared to look into it. This is actually really usefull info.
Adam Stหลายเดือนก่อน
They are the best 2 settings that are still working, no need to fix.
David Ghaemiหลายเดือนก่อน
It blows harder
Panjab Bornหลายเดือนก่อน
Man looks like connor macgregor's less successful cousin
The Rice Potatoหลายเดือนก่อน
They normally blow for a reason such as blower motor bearings begininng to seize, increasing electrical load on resistors. Check the actual blower spins freely or the customer will be back soon...
Jay Emหลายเดือนก่อน
$1724 later....
S Aหลายเดือนก่อน
But the question is how did the resistor burn out what made it do that? Its called for the fans at home a parts changer lol
the Mechanicหลายเดือนก่อน
Thank you for an honest video not making fun of people for not knowing about cars. Subbed
UltraGamma25หลายเดือนก่อน
Could this be why my 2013 Ford Explorer‘s blower is stuck on high or is the resistor one of the new ones that’s just gone bad?
lake rouseหลายเดือนก่อน
I’ve seen this happen before. Someone someone took the dial and put it back on wrong. Lol. Maybe it was a prank. 😂
bimmermacหลายเดือนก่อน
Bimbimbim ... overspeed ... overspeed ...
FreakingDoomShroomหลายเดือนก่อน
Take a shot for every time he says blower
Berzerker Godหลายเดือนก่อน
I thought this was gonna be a meme but turns out super helpful.
FaZe CrAzY626หลายเดือนก่อน
Those resistors have been used for damn near ever. Remember when I used to just be three different coils of bare wire
Jeffrey Whitlatchหลายเดือนก่อน
This dude knows his stuff man!! I can appreciate that, thanks for the awesome videos
Ribble Deanหลายเดือนก่อน
It's a Buick naturally
Jonathan Saidahหลายเดือนก่อน
With Australian fords it right behind the switch and you've got start pulling the dash apart.
Link Knightหลายเดือนก่อน
I had an 02 malibu that was like this. Hell yeah always wandered
Chaz Danielleหลายเดือนก่อน
What would make it switch from ac to heat when you hit a bump? My dads truck is doing this ...FWI it's about 13 yrs old!! Lol
Brandy Bหลายเดือนก่อน
Too many variables. Probably related to the blend door motor. Not a repair for the faint of heart if it gets complicated.
corvettebobหลายเดือนก่อน
Thanks so much for fixing that for me! The mechanic: no problem!...now that will be 1500 dollars. Cash or credit?
robหลายเดือนก่อน
Seems to my like replacing that resistor costs more than the car is worth
Chip Dหลายเดือนก่อน
I had to replace one of these, all the speeds slowly went out one by one and my wife thought I was going crazy, she never noticed I fixed it because she always ran it 9n high
Justacuase18หลายเดือนก่อน
Some modern cars don’t use a blower motor resistor anymore, the fan is PWM (pulse width modulation) controlled. Basically it sends pulses of 12v to the fan motor, slow speed is achieved by shorter pulses, so it sends 12v power as a short pulse, as you increase the speed the frequency of the pulses increase until you hit Max where it sends full power. Usually used in rigs with automatic climate control with automatic fan speed control.
Andrew Beemanหลายเดือนก่อน
These are always fun to change when you go and pull the knee bolster out and the heater box had gotten full of leaves and caught on fire and burned out the heater box lol
Andrew Beemanหลายเดือนก่อน
Lol shhhh gotta keep charging the normies
Alexander Goodingหลายเดือนก่อน
Dodge Van's, they are outside in the engine compartment.
Steve's Channelหลายเดือนก่อน
Ahhhhhh the good ol days at GM
Rob Jurenaหลายเดือนก่อน
90s model Cherokees burn through these things like light bulbs.
spudthegreater USAหลายเดือนก่อน
Well I guess I gotta take the resistor out my girlfriend if you know what I mean
Electric Guitaristหลายเดือนก่อน
I'm having this same issue and was about to replace the blower motor. Maybe I should check this too.
Unchained Wingsหลายเดือนก่อน
If it's turning on at all it likely isn't any kind of electric motor, just for future reference.
Daniel Faradayหลายเดือนก่อน
Thank God for guys like you. I can't work on today's car's. Give me the 60's car's.
7980flhหลายเดือนก่อน
Just fix the resistor and blower motor together. The blower more then likely has high resistance in the motor and will over time keep burning up the resistor.
myboy051หลายเดือนก่อน
Remember the old blower resistors , 3 coiled wires of different sizes .
Backyard-Built-Trucksหลายเดือนก่อน
The real problem is people driving those shit cars
Adrian Osunaหลายเดือนก่อน
His beard looks so weird
Anonymous Slayerหลายเดือนก่อน
What If there's no air flow in the mid vents, only the side ones??
Greg The Legหลายเดือนก่อน
That ginger thing on your chin is disgusting......
scott margerisonหลายเดือนก่อน
Actually sound like linus tech tips no cap
XZeeterหลายเดือนก่อน
I had that problem once.. No blower at all for two North East Ohio winters.. I froze for 2 years.. After all that, it turned out the knob was just stripped.. Lol.
ForgivenBobหลายเดือนก่อน
I never knew how this worked, I just knew what to fix if I had that problem.
AntiAหลายเดือนก่อน
That's what mine does. The 4the one only works. On rare and I mean rare occasions the others will work
josh furnellหลายเดือนก่อน
That blows...
flipnotrabหลายเดือนก่อน
Great educational content but I’m afraid this guy doesn’t understand what a “customer states...” video is. Very disappointed click bait.
DGหลายเดือนก่อน
Man, I worked at a junk yard(salvage yard as they called it) specializing in foreign cars and had to pull a resistor for someone. I can't remember which car it was exactly, probably a BMW or Benz, but I had to pull the dash and everything outta that car. Few hour job, for a less than 50 dollar part. I wish they were all smart enough to just put em by the glove box.
Mark Fustonหลายเดือนก่อน
Thanks for showing people this man. I work in auto parts and arguing with customers that think they know what they are doing is the worst 🤣
Jaalanหลายเดือนก่อน
Bad alternator
Franklessหลายเดือนก่อน
I like how he says “settings”..... Seddins lol
Randy Higginsหลายเดือนก่อน
replaced the new resistor, and ohm my god it worked!
foosmonkeyหลายเดือนก่อน
She just spent 7 times more than that car is worth.
Harry Manilowหลายเดือนก่อน
Thank you 🙏! I am going to fix my fan now I always thought it was a fuse and every time I looked it up I looked it up with my car so I got limited results. I appreciate this a lot
Mockingbird Redactedหลายเดือนก่อน
How many men are going to run down to their local adult gag shop and ask for a blower resistor for their wife or girlfriend lol
walkie talkieหลายเดือนก่อน
Wide ass open or nothing at all. We don't do halfway here!
You deserve 1 mil subs; hilarious but still teaching
This was actually educational, thank you.
No problem!
Did the 1999 Century suffer from the Y2K bug?
It sure did!
This is the same thing i did in my chevy astro. Same problem and i replaced it with the update resistor and all the speeds work again. The old design i pulled from my vehicles circuit board was toasted black just like this one in the video!
You just helped me diagnose this issue for my 06 sebring. I've been wondering what it could be for a couple months lol
We got all spee-
Seen this happen with several 2000-ish GM cars. Wonder if there was a weak design on this part back then.
*Microsoft fanfare*
I've replaced resistors in so many Jeeps it's not even funny.
Good one mate. It's an old bunky so I just hit it when it misbehaves 👍😄
That’ll be $1400
wow how incredibly inefficient doing resistive speed control. how hard is PWM really?
Why would anyone spend money on that shitbox of a car? Brakes ok, oil change sure, headlight whatever. But fixing the least useful blower speeds? People waste their own time and others.
That's a thermal fuse not a resistor... Resistors on the PCB
I don't know why that manufacturer wasn't smart enough to use pwm on blower motors. This is one of those parts designed to fail.
I like you dude not just because you do a funny "customer states some ignorant statement thats totally not the problem but they are sure they know better" but also because you explain in the simplest form what is wrong and where it is, and what the solution to that would be. *NICE*
What is with you clowns and the “customer states” videos wicked original
It's not rocket science, don't forget that. I do probably a better job than you for half the cash i bet
seen plenty of gmc work trucks with this issue but never cared to look into it. This is actually really usefull info.
They are the best 2 settings that are still working, no need to fix.
It blows harder
Man looks like connor macgregor's less successful cousin
They normally blow for a reason such as blower motor bearings begininng to seize, increasing electrical load on resistors. Check the actual blower spins freely or the customer will be back soon...
$1724 later....
But the question is how did the resistor burn out what made it do that? Its called for the fans at home a parts changer lol
Thank you for an honest video not making fun of people for not knowing about cars. Subbed
Could this be why my 2013 Ford Explorer‘s blower is stuck on high or is the resistor one of the new ones that’s just gone bad?
I’ve seen this happen before. Someone someone took the dial and put it back on wrong. Lol. Maybe it was a prank. 😂
Bimbimbim ... overspeed ... overspeed ...
Take a shot for every time he says blower
I thought this was gonna be a meme but turns out super helpful.
Those resistors have been used for damn near ever. Remember when I used to just be three different coils of bare wire
This dude knows his stuff man!! I can appreciate that, thanks for the awesome videos
It's a Buick naturally
With Australian fords it right behind the switch and you've got start pulling the dash apart.
I had an 02 malibu that was like this. Hell yeah always wandered
What would make it switch from ac to heat when you hit a bump? My dads truck is doing this ...FWI it's about 13 yrs old!! Lol
Too many variables. Probably related to the blend door motor. Not a repair for the faint of heart if it gets complicated.
Thanks so much for fixing that for me! The mechanic: no problem!...now that will be 1500 dollars. Cash or credit?
Seems to my like replacing that resistor costs more than the car is worth
I had to replace one of these, all the speeds slowly went out one by one and my wife thought I was going crazy, she never noticed I fixed it because she always ran it 9n high
Some modern cars don’t use a blower motor resistor anymore, the fan is PWM (pulse width modulation) controlled. Basically it sends pulses of 12v to the fan motor, slow speed is achieved by shorter pulses, so it sends 12v power as a short pulse, as you increase the speed the frequency of the pulses increase until you hit Max where it sends full power. Usually used in rigs with automatic climate control with automatic fan speed control.
These are always fun to change when you go and pull the knee bolster out and the heater box had gotten full of leaves and caught on fire and burned out the heater box lol
Lol shhhh gotta keep charging the normies
Dodge Van's, they are outside in the engine compartment.
Ahhhhhh the good ol days at GM
90s model Cherokees burn through these things like light bulbs.
Well I guess I gotta take the resistor out my girlfriend if you know what I mean
I'm having this same issue and was about to replace the blower motor. Maybe I should check this too.
If it's turning on at all it likely isn't any kind of electric motor, just for future reference.
Thank God for guys like you. I can't work on today's car's. Give me the 60's car's.
Just fix the resistor and blower motor together. The blower more then likely has high resistance in the motor and will over time keep burning up the resistor.
Remember the old blower resistors , 3 coiled wires of different sizes .
The real problem is people driving those shit cars
His beard looks so weird
What If there's no air flow in the mid vents, only the side ones??
That ginger thing on your chin is disgusting......
Actually sound like linus tech tips no cap
I had that problem once.. No blower at all for two North East Ohio winters.. I froze for 2 years.. After all that, it turned out the knob was just stripped.. Lol.
I never knew how this worked, I just knew what to fix if I had that problem.
That's what mine does. The 4the one only works. On rare and I mean rare occasions the others will work
That blows...
Great educational content but I’m afraid this guy doesn’t understand what a “customer states...” video is. Very disappointed click bait.
Man, I worked at a junk yard(salvage yard as they called it) specializing in foreign cars and had to pull a resistor for someone. I can't remember which car it was exactly, probably a BMW or Benz, but I had to pull the dash and everything outta that car. Few hour job, for a less than 50 dollar part. I wish they were all smart enough to just put em by the glove box.
Thanks for showing people this man. I work in auto parts and arguing with customers that think they know what they are doing is the worst 🤣
Bad alternator
I like how he says “settings”..... Seddins lol
replaced the new resistor, and ohm my god it worked!
She just spent 7 times more than that car is worth.
Thank you 🙏! I am going to fix my fan now I always thought it was a fuse and every time I looked it up I looked it up with my car so I got limited results. I appreciate this a lot
How many men are going to run down to their local adult gag shop and ask for a blower resistor for their wife or girlfriend lol
Wide ass open or nothing at all. We don't do halfway here!